| Last Modified: 11-29-2007 | 1.6 A | |
| Service Category: Suspension | Section: Rear Suspension | |
| Model Year: 2008 | Model: Sequoia | Doc ID: RM000003F65000X |
| Title: REAR SUSPENSION: REAR UPPER ARM: INSTALLATION (2008 Sequoia) | ||
INSTALLATION
1. TEMPORARILY INSTALL REAR UPPER CONTROL ARM ASSEMBLY LH
(a) Temporarily install the rear upper control arm with the 3 bolts and 3 nuts.
2. CONNECT REAR SPEED SENSOR WIRE
(a) Connect the rear speed sensor wire with the 4 bolts.
Torque: 13 N·m (127 kgf·cm, 9 ft·lbf)
(b) Connect the speed sensor connector.
3. INSTALL REAR BRAKE FLEXIBLE HOSE
(a) Install the rear brake flexible hose with the 3 bolts.
- for bolt A
Torque: 29 N·m (296 kgf·cm, 21 ft·lbf)
- for bolt B
Torque: 13 N·m (127 kgf·cm, 9 ft·lbf)
4. INSTALL REAR DISC BRAKE CYLINDER ASSEMBLY LH
5. INSTALL REAR HEIGHT CONTROL SENSOR SUB-ASSEMBLY LH
6. INSTALL REAR WHEEL
7. STABILIZE SUSPENSION
8. TIGHTEN REAR UPPER CONTROL ARM ASSEMBLY LH
(a) Tighten the 3 bolts and 3 nuts.
Torque: 185 N·m (1886 kgf·cm, 137 ft·lbf)
9. INSTALL FUEL TANK ASSEMBLY (for 3UR-FE)
10. INSTALL FUEL TANK ASSEMBLY (for 2UZ-FE)
11. INSPECT AND ADJUST REAR WHEEL ALIGNMENT
|
|